Kleinn Air Horns
Kleinn Air Horns
Kleinn Air Horns
Kleinn Air Horns
Kleinn Train Horns
Kleinn Train Horns
Kleinn Train Horns
Kleinn Train Horns
Kleinn Truck Horns
Model 6850 - Wiring Kit Model 6880 - BlastMaster Upgrade Kit
6850 6880
All the wires, connectors and other parts you need to install a Kleinn air horn system. The kit includes a 5-pin relay, fuse & fuse holder, wire for the compressor and horn, Telfon tape for air fittings and a variety of wire crimps and connectors. Also included is a color coded wiring diagram for hooking up a compressor. Push your Kleinn 230 or 630 train horns to the MAX with the "BlastMaster" air flow kit. The "BlastMaster" includes two extra solenoids, oversized 1/2" air line, and all the other fittings and tubing required to put a separate solenoid on each train horn trumpet. The individual air horns no longer have to share the air from one solenoid.... boosting the train horn sound output to a mind-blowing level.
Model 6890 - Ultra BlastMaster Upgrade Kit Model VX6003-HK/VX7003-HK - Valve Upgrade Kits
6890 VX6003-HK
For Model 730 train horn only. Increase air flow and push the Model 730 Demon™ to unheard of decibel levels. The Ultra BlastMaster™ provides everything you need to add an additional two VX6003 solenoid valves to your Model 730 Demon™. Adding two more solenoids allows each trumpet to have a dedicated air source for dramatically increased flow and a train horn that will push your Demon™ over the edge. Prepare your eardrums; they’re screwed. The more air that gets in to your horn the higher the decibel output will be. These upgraded Vortex valves have a higher air flow than the standard Kleinn valve and will make the horns louder. This kit can also make Kleinn horns compatible with higher pressure air systems. The kit inlcudes the upgraded valve, 12 ft of 1/2" tube, and the necessary fittings and adapters.
Find a Kleinn Dealer

Become a Kleinn Dealer